This manpage has been automatically generated from fdutils's texinfo documentation. However, this process is only approximative, and some items, such as crossreferences, footnotes and indices are lost in this translation process. Indeed, these items have no appropriate representation in the manpage format. Moreover, only the items specific to each command have been translated, and the general information about fdutils has been dropped in the manpage version. Thus I strongly advise you to use the original texinfo doc.
To generate a printable copy from the texinfo doc, run the following commands:
./configure; make dvi; dvips fdutils.dvi
To generate a html copy, run:
./configure; make html A premade html can be found at: `http://www.tux.org/pub/knaff/fdutils'
To generate an info copy (browsable using emacs' info mode), run:
./configure; make info
The diskd command has the following syntax:
Selects the drive to observe for disk insertion. By default, drive 0 (/dev/fd0) is observed.
Selects the polling interval. The interval is given in tenths of seconds. Default is 10 (one second).
Automatic unmounting cannot yet be handled. It is indeed not enough to scan for disk removal, because when the disk is removed, it is already too late: There might be some buffers needing flushing. However, the fdmountd program allows automatic unmounting by using the SYNC mount options, which switches off write buffering (see section fdmount).
lib/main.php:944: Notice: PageInfo: Cannot find action page