James Spooner writes:
The Dick Smith USB 2.0 802.11g WLAN Adaptor (XH8344) is a RT2500USB (rt2570) adapter and work with Linux and FreeBSD.
Under Linux use the rt2570 drivers from http://rt2x00.serialmonkey.com/, I believe that the rt2x00 unified drivers work - but I can't be sure - YMMV. Under FreeBSD (6.0) the Ural driver works out of the box.
NB: This device REQUIRES a USB 2.0 port to work, I have not found a machine (FreeBSD or Linux) that can use the device in USB 1.x mode, it intermittantly associates, but fails to maintain the connection.
Volker Kuhlmann writes:
Get driver source from sourceforge project "rt2400", rt2500-1.1.0-b3.tar.gz.
It needs packages kernel-source, and I had kernel-syms too. Driver compiles fine. There's only one file to copy for installation - rt2500.ko. Overwriting the SuSE-supplied one is fine.
To compile the RaConfig2500 utility, package qt3-devel (and its dependencies) and a C++ compiler are needed. One needs qmake first, it's in /usr/lib/qt3/bin/qmake and for some reason not in $PATH.
ln -s ../lib/qt3/bin/qmake /usr/bin
Compiles fine. Runs fine, too.
Version 1.1.0 beta3 is worlds better than beta1. It actually always establishes a link to the AP. It works fine, too. Configure WPA-PSK in yast, and ignore the "WPA not supported yet" by rcnetwork restart. Run RaConfig2500 and configure WPA-PSK, somewhere it stays permanently. Hence WPA-PSK works too.
The only downside is that while playing with RaConfig2500, the box locked rock-solid 3 times, and I had to engage the reset button. The whole setup looks ok at first (and second) glance, but I reserve judgement about the reliability of Ralink 2500 until later.
Sources packages exist in the debian testing and unstable archive for both the rt2400 and rt2500 chipsets. This is the easy way to go for such users. The below is what I did, with the default 2.6.8 (x86) kernel:
apt-get install linux-headers-2.6.8-2-386 wireless-tools build-essential rt2400-source gcc-3.3 cd /usr/src/ tar xfvz rt2400.tar.gz module-assistant prepare module-assistant get rt2400 module-assistant build rt2400 #install the newly created package, note the file might be named differently dpkg --install rt2400-2.6.8-2-386_1.2.2+cvs20050730-3+2.6.8-16_i386.deb
Now you need to update /etc/network/interfaces. This is a snipet from my interfaces file (eth1 is my wireless interface). Note you need to put your own wep key and essid in the last two lines.
auto eth1 iface eth1 inet static address 192.168.1.3 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 up \ /sbin/iwconfig eth1 mode Managed && \ /sbin/iwconfig eth1 key your_key_here && \ /sbin/iwconfig eth1 essid your_essid_here
lib/main.php:944: Notice: PageInfo: Cannot find action page